The 436 Model Shop - Home
The 436 Model Shop - Home

Adhesives/Glues
Aircraft Accessories
Aircraft Plans
Airplanes
BARGAIN BIN
Building Accessories
Building Materials
Car Accessories
Chargers/Cyclers
Control Line & F.Flight
Covering
Du-Bro
Eng Access. & Parts
Engines Zenoah Parts
Exhausts & Mufflers
Fasteners
Field Equipment
Free Flight
Fuel & Accessories
Glow Plugs
H/Launch Accessories
Helicopters/ Access
Paints & Accessories
Pilot Figures
Propellers
Radio Accessories
Robart
Servos
SIG
Spinners
Sullivan
Tools
Wheels & Accessories

Details For This Product Shopping Trolley - view contents
<< Back

R114F 4-Channel 72MHz FM Stock Number: 114F72
This is a R114F 4-Channel LO 72MHz FM Receiver "Without Crystal" from Futaba.
**** It should be noted that it is NOT suggested to go below channel 16
with these receivers as you may experience interference. ****

FEATURES: Narrow-band spacing and superior signal filtering combined to
provide exceptionally clear, interference-free reception and
amazingly smooth, accurate control.
Designed for modelers who want to use a single radio transmitter
to run several different models.
Perfect for Park or Slow Flyers.
Range of approximately 650 feet (200m)

INCLUDES: One R114F 4-Channel 72MHz FM Receiver without Short Crystal

REQUIRES: One FUTL6216 to FUTL6235 "Short" Crystal
If utilizing all 4 channels a Y-harness is needed HCAM2500.

SPECS: Narrow Band: 20kHz
Power Requirements: 4.8 to 6.0 volts (shared with servos)
Current Drain: 10mA
Length: 1-1/4" (31.75mm)
Width: 1/2" (.02mm)
Height: 7/8" (.28mm)
Weight: 0.35 oz. (9.9g)

COMMENTS: Special Notice about Frequency Changes-
*72MHz- Low band channels 11 to 35; High band channels 36 to 60.
Receiver crystal channels (11-35 or 36-60) Within Each Band
Can Be Changed, and Do Not Require a retuning of the receiver.
*72MHz Frequency Band (low or high) for the receiver Can Not Be
Changed from low to high band, OR from high to low band without
sending it into Futaba Services for retuning.
*50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under any
circumstances be interchanged with each other. The receiver Must
be sent in for retuning to the appropriate band.
*50MHz, 27MHz and 75MHz receiver crystals Can be changed anywhere
within the respective bands. There are no high or low bands such
as the 72MHz band has.
*Transmitter Crystals Can Not be changed to another channel except
by a licensed service center. It is against FCC regulations, and
illegal for the user to change a frequency determining component
of a transmitter. If the radio is not retuned, it can be a hazard
spectators, modelers or property, and void AMA insurance coverage.

This item was found in these categories...

Price (NZ$ including GST): $115.00
Quantity:

Add this item to your trolley




Notify me of updates to this site



Categories  | About Us | Contact | Our Products  | Manufacturers
What's New | Model of the Month | Ordering | Specials | Links | Sitemap | Home
Copyright © 436 Model Shop | Site by WebFoot